Add a Watermark to a PDF

Brand pages as DRAFT, CONFIDENTIAL or with your company name — once through the middle, or repeated across the whole page. The stamp is applied locally and the output carries no tool branding.

30%
0 uploads

Watermarking is a control, not decoration: it is how you mark a document as not final, or as traceable back to a recipient. That intent breaks if the tool adds its own logo to your file, which is exactly what most free watermark services do in reverse.

This tool writes a text stamp with configurable opacity, size and rotation, either straight across the centre or on a diagonal — or repeated across the entire page in a staggered weave, with horizontal and vertical gaps you set. Because the text is drawn as a PDF font object rather than baked into a rasterised page, the file stays small and the text remains selectable and crisp at any zoom level.

The repeat layout is for documents where a single stamp is too easy to crop around: the text is laid out on a rotated grid that runs past all four page edges, with every other row offset by half a horizontal gap so the result reads as a weave rather than as columns. Gaps are measured in PDF points (72 pt equals one inch) and describe the empty space between one copy of the text and the next, not the distance between baselines. If the gaps are small enough to imply more than about 4,000 stamps on a page, the tool stops and asks for a larger gap instead of appearing to hang.

What a watermark can and cannot do

It is worth being precise about this, because watermarks are routinely asked to do more than they can. A text stamp is a deterrent and a label: it makes a page obviously not final, and it ties a copy back to whoever it was issued to. It is not a control. Anyone with a screenshot tool removes it in one step, anyone with PDF editing software can delete the content object, and a photocopy of a printout can lose a light stamp altogether. If the requirement is really "this must not be usable by anyone else", the answer is access control or redaction, not a watermark.

Choosing opacity, rotation and colour

When the repeat layout earns its place

A single stamp is easy to work around: a screenshot cropped to the lower half of the page takes it out of frame, and a corner stamp vanishes in a photocopy. Repeating the text across the whole page in a staggered weave makes that crop impossible, which is why it is the right choice for draft pricing, unreleased artwork, and internal-only policy documents. The trade-off is readability, since the body text now sits behind a pattern. Keep the opacity low and the gaps generous — a reasonable starting point for a four-word label is about 220 points horizontally and 140 vertically — and check a single page before running a long document.

Watermarking only part of a document

A page list is supported, so a stamp can be confined to the pages that need it. Two cases come up repeatedly: an approval or sign-off section that runs to a handful of pages, and a notice page appended to a document whose body should not be stamped. In both, a short explicit list is safer than stamping everything and trusting that nobody objects.

How to add a watermark to a PDF

  1. Add your PDFDrop the document you want to stamp.
  2. Type the watermark textFor example DRAFT, CONFIDENTIAL or your company name.
  3. Choose one stamp or a full-page repeatRepeat mode adds horizontal and vertical gap controls, in points.
  4. Adjust styleSet opacity, font size, colour and rotation. Diagonal at 45 degrees is the classic choice.
  5. Apply and downloadEvery page is stamped locally and the new PDF downloads.

Frequently asked questions

Will the tool add its own logo?
No. The only thing drawn onto your pages is the text you type.
Can I repeat the watermark across the whole page, not just once?
Yes. Set Layout to "Repeat across the whole page". The text is drawn on a rotated grid that extends past every page edge, with each row offset by half a horizontal gap from the one above it, and you control the horizontal and vertical gaps. Position has no meaning in that layout, so the field is hidden.
What exactly do the gap values measure?
The empty space between one copy of the text and the next, in PDF points (72 pt = 1 inch). It is not the distance between baselines, so a larger number always means fewer, more widely spaced copies — regardless of the font size you chose.
Why does it refuse a very small gap?
Below a certain spacing a page would need tens of thousands of stamps, which can lock up the browser tab. Past roughly 4,000 stamps per page the tool stops and asks for a larger gap rather than appearing to freeze.
Can I watermark only some pages?
A custom page list is supported, so you can stamp selected pages instead of the whole document.
Is the watermark removable?
A text stamp is a real PDF content object. It is not a layer a viewer can simply toggle off, though it can be edited with PDF authoring software.
Why is my watermark invisible?
Check the opacity value. A very low opacity on a light background can be nearly invisible at print scale.
Does the watermark change my file size?
Only slightly. The embedded font and a short text string add a few kilobytes.

Related tools

Related guides

Every tool on this site runs locally. Read the no upload policy to see how to verify it yourself.